background image

12

GENERAL SAFETY RULES

Your CHAIN SAW has many features that will 
make your job faster and easier. Safety, perfor-
mance and reliability have been given top prior-
ity in the design of this tool, qualities to make 
easy to maintain and to operate.

 WARNING: carefully read the entire manual 

before attempting to use this tool. Make sure 
to pay special attention to the safety rules and 
indications, plus all the warnings and cautions 
of this manual.

GENERAL RULES FOR THE USE OF THE CHAIN 
SAW

1. Never operate a chain saw when you are fa-
tigued. Ill, or upset, or under the influence of 
medication that may make you drowsy, or if you 
are under the influence of alcohol or drugs
2.  Use safety footwear, snug fitting clothing 
and eye, hearing and head protection devices.
3.  Always use caution when handling fuel. Wipe 
up all spills and then move the chain saw at least 
3 m from the fueling point before starting the 
engine.
a) Eliminate all sources of sparks or flame (i.e. 
smoking, open flames, or work that can cause 
sparks) in the areas where fuel is mixed, poured, 
or stored.
b) Do not smoke while handling fuel or while 
operating the chain saw.
4. Do not allow other persons to be near the 
chain saw when starting or cutting. Keep by-
standers and animals out of the work area. Chil-
dren, pets and bystanders should be a minimum 
of 10 m away when you start or operate the 
chain saw.
5. Never start cutting until you have a clear work 
area, secure footing, and planned retreat path 
from the falling tree.
6. Always hold the chain saw firmly with both 
hands when the engine is running. Use a firm 
grip with thumb and fingers encircling the chain 
saw handles.
7. Keep all parts of your body away from the 
saw chain when the engine is running.
8. Before you start the engine, make sure the 
saw chain is not contacting anything.
9. Always carry the chain saw with the engine 
stopped, the guide bar and saw chain to the 
rear, and the muffler away from your body.
10. Always inspect the chain saw before each 
use for worn, loose, or damaged parts,  Never 
operate a chain saw that is damaged, improper-
ly adjusted, or is not completely and securely as-

sembled. Be sure that the saw chain stops mov-
ing when the throttle control trigger is released.
11. All chain saw service, other than the items 
listed in the Owner’s Manual, should be  per-
formed by competent chain saw service person-
nel.
12.  Always shut off the engine before setting 
it down.
13. Use extreme caution when cutting small size 
brush and sampling because slender material 
may catch the saw chain and be whipped to-
ward you or pull you off balance.
14. When cutting a limb that is under tension, 
be alert for springback so that you will not be 
stuck when the tension in the wood fibers is re-
leased.
15. Never cut in high wind, bad weather, when 
visibility is poor or in very high or low tempera-
tures. Always check the tree for dead branches 
which could fall during the falling operation.
16. Keep the handles dry, clean and free of oil 
or fuel mixture.
17. Operate the chain saw only in well ventilat-
ed areas. Never start or run the engine inside a 
closed room or building. Exhaust fumes contain 
dangerous carbon monoxide.
18. Do not operate the chain saw in a free unless 
specially trained to do so.
19. Guard against kickback. Kickback is the 
upward motion of the guide bar which occurs 
when saw chain at the nose of the guide bar 
contacts an object. Kickback can lead to danger-
ous loss of control of the chain saw.
20. When transporting your chain saw, make 
sure the appropriate guide bar scabbard is in 
place.

OPERATING PRECAUTIONS

• The gases emanated from the exhaust contain 
carbon monoxide, a toxic gas without odor or 
color. Inhalation of carbon monoxide can cause 
serious brain damage or death. Never start or 
operate the engine in a closed or poorly venti-
lated area.
• To use this product, wear a helmet, protective 
glasses or mask, thick work gloves, safety boots 
with non-slip soles, ear protection.
• It is recommended that you have: tools and 
files, fuel and oil stored properly, items to mark 
your work area (ropes, signals, etc.), whistle (for 
collaboration or in case of emergency), ax or 
saw (to eliminate obstacles).
• Maintain a firm and well-balanced posture. Do 
not try to reach objects beyond your reach. In 
trying to do so, you may lose balance or expose 

Содержание MS818





















Отзывы: