urmet domus THERA 5 Ref.1092/602, Инструкция по установке и эксплуатации

Страница: 79 / 92

DS1092-090 79
NAME
Select NAME and press OPEN to access the following sub menu, where to give a name to the preset:
 Use the arrow buttons to move the cursor on the position where the character must be entered.
 Press the button OPEN to select the desired number or letter.
 Use the arrow buttons to move the cursor on the position of the desired character.
 Press the button OPEN to confirm it.

To delete the character or characters previously selected, move the cursor over the symbol after
the letter Z and press the button OPEN.
 Press the button CLOSE to confirm the characters previously selected and quit.
4.5.8.4 Sector setup – definition of sectors
Dome movements are limited inside the sectors configured by the user.
Select SECTOR SETUP and press OPEN to access the following submenu:
Option Value Description
Number 1 ÷ 8
This option allows to identify the sectors to be
stored. Up to 8 sectors max. can be selected.
Name /
This option allows to give a name to the stored
sectors. By pressing twice OPEN, on the display
appears the screen where it is possible to edit
the sector name (see below).
Pan Start POS 0,0 ÷ 359,9 ÷ 0,0 ÷ 90,0
This option allows to store the PAN start
coordinates of the sector. Press OPEN and with
the arrow buttons move the dome to the starting
shot to be stored. The user can see on the
display the coordinates of the displayed shot.
Press again OPEN to confirm the storing of the
sector start point.
Pan End POS 0,0 ÷ 359,9 ÷ 0,0 ÷ 90,0
This option allows to store the PAN end
coordinates of the sector. Press OPEN and with
the arrow buttons move the dome to the ending
shot to be stored. The user can see on the
display the coordinates of the displayed shot.
Press again OPEN to confirm the storing of the
sector end point.
- - - - - - - - - - - - - - - - -
0123456789ABCDEFRGHIJKLMN
OPQRSTUVWXYZ-
IRIS CLOSE When Done
Sector Setup
>1 Number 1
2 Name ----------
3 Pan Start POS
4 Pan End POS
5 Tilt Start POS
6 Tilt End POS
7 Name Display ON
IRIS CLOSE to Exit