urmet domus Note 2 1723 Series, Конфигурационная книжка

Страница: 26 / 48

26 DS1723-024
It is possible to:
Send a noti fi cation to an external siren.
Activate a speci fi c home automation scenario (e.g. the garden lights).
Send the remote alarm signal, by means of a call sending device (the CallMe app, in this case). This indication
generates a push noti
fi cation on the smartphone, of the following type:
The alarm sensor can be closed and reopened, thereby simulating a second alarm.
However, this second simulation must be performed AT LEAST 90 seconds after the
fi rst simulation
of an alarm. Whenever the alarm sensor is energised, the video door phone ignores any after
alarms for 90 seconds.
WARNING. The alarm masking time on call sending device is currently longer, equal to 10
minutes
(15)
.
PAST ALARM SIGNALLING (ALARM MEMORY)
The past alarm memory (one or more alarms) is signalled to the user upon return home by the Alarm LED fl ashing
red (the video memory LED will also fl ashing green, if a video clip was recorded).
DISARMING
The alarm is typically disarmed during the entry time
(16)
, by tapping on the icon to clear the tick.
HOW TO BROWSE VIDEO CLIPS
All recorded video clips (automatically in case of alarm or voice mail, or manually in case of recording during
a call or auto-on function) are listed in the video clips section which can be accessed by pressing the button
. The number next to the icon indicates the number of automatically recorded video clips (video
door phone voice mail and alarm) not yet seen.
The recordings to be viewed are green, the ones which have already been black.
Simply tap on the name of a video clip to see it.
—
—
—
(15) So, if the generation of multiple alarms in close sequence is simulated during the test phase, e.g. 2 minutes
from one another, these will all be stored in the alarm history of the video door phone, but only the fi rst one
will appear in the alarm history of smartphone. This masking time will be reduced to just 90 seconds on the
new version of the call sending device, so as to align the two behaviours.
(16)
Note that during the entry time:
- if there was no previous alarm, the LED fl ashes green
- If there was a previous alarm, the LED fl ashes alternately green and red (alarm memory).