sec.4b
−−−−
7
2 VOICE - Technical Manual
DOOR PHONE APARTMENT STATIONS
2VOICE HAND-FREE DOOR PHONE
Ref. 1183/7
The
Ref.1183/7 door phone is based on Urmet mechanical
design and offers all the functions of a door phone system in addition
to simple home automatic control using Yokis models.
DESCRIPTION OF THE DEVICE
The main characteristics of door phone are the following:
backlit door opening button
with green LED
4 additional button ( , ,
,
)
Multicolour indicator LED (mute, automatic door lock release,
open door, state of programming)
Con
fi
guration dip switch (SW1 – SW2):
n.1 of SW1, de
fi
nes the door phone operating mode: “Hands
Free”/Push to talk”;
n.2÷8 of SW1, de
fi
ne the apartment number in the column;
n.1÷2 of SW2, de
fi
ne the station number in the apartment;
Refer to the paragraph ”Dip-switch con
fi
guration”for how
to set the dip switches.
"Push to talk" function to activate two audio channels towards the
inside and the outside singularly;
adjustable volume with mute function;
differentiated door phone or
fl
oor call with
fi
ve different ring
tones;
bracket for
fl
ush-mounting the device.
STRUCTURE
1
6
10
11
9
8
7
2
3
4
5
12
13
14
SW1 SW2
1
. Microphone
2
. Button
see button function table
3
. Button
see button function table
4
. Button to connect to Yokis devices; contacts X1, GT): max
50 mA - 12 Vdc
5
.
Button to connect to Yokis devices; contacts Y1, GT): max
50 mA - 12 Vdc
6
. Multicolour
indicator
LED
7
.
Call and conversation speaker
8
. Button used to activate/deactivate audio
9
.
Green LED under the
Button
•
•
•
•
–
–
–
•
•
•
•
10
.
Door opener button
11
. Green LED under the
button
12
. Terminals for connecting to the system
13
. Line
termination
jumper
ON
OFF
14
. Con
fi
guration dip switch (SW1 - SW2)
DESCRIPTION OF TERMINALS
GT Button common terminals and
Y1 Button
X1 Button
S-
}
Supplementary ringer
S+
]
CP Floor call
]
LINE System BUS connection
BUTTON FUNCTIONS
State
Button
STAND-BY
WAITING
FOR PICK-UP
(RECEIVING
CALL)
DURING AUDIO
OPERATION
STAND-BY
AND
BUTTON
PRESSED
STATE OF
PROGRAMMING*
(ONLY WITH
DOOR PHONE IN
STAND-BY)
Pedestrian
door lock
release
Pedestrian
door lock
release
Pedestrian
door lock
release
Pedestrian
door lock
release
Connect/
Disconnect the
automatic door
opening system
---
Audio
activation
If pressed in the
operating mode:
A) “Hands Free”
ends the
conversation;
B) in “Push to talk”:
if pressed a
long time, it
enables the
audio of the
door unit;
if short pressed
it activates or
terminates the
conversation
—
—
---
Adjust door phone
and floor call
volume (volume
changes according
to the following
sequence: HIGH,
LOW, MUTE)
Special
function
(default: 7)
Special
function
(default: 7)
Special function
(default: 7)
Programmable
Intercom call 2
(Default; not
programmable
Floor call ring
Tone (5 different
ring tones)
Driveway
door lock
release
Driveway
door lock
release
Driveway
door lock
release
Programmable
Intercom call 1
(Default; not
switchboard
call)
Door phone
call ring tone
(5 different ring
tones)
(*) To enter and exit programming state, hold button pressed for
longer than 5 seconds. The yellow LED will blink slowly to indicate
that programming mode is selected. In any case, after 10 minutes
the system exits the programming state and saves the modi
fi
ed
parameters.
LED INDICATIONS
6
. Multicolour indicator LED
PRIORITY FUNCTIONS
1
Rapidly blinking red: mute on
2
Green blinking: automatic door opener on
3
Red on steady: main calling station door open
4
Slowly blinking red: secondary calling station door open
5
Slowly blinking yellow: programming state on
2VOICE HAND-FREE DOOR PHONE Ref. 1183/7
DESCRIPTION OF THE DEVICE
2VOICE HAND-FREE DOOR PHONE
Ref. 1183/7
