DS1092-181A
16
7 COMMANDS AND ADJUSTAMENTS
ON/OFF BUTTON [1]
ADJUSTMENT BUTTON / RIGHT ADJUSTMENT [4]
VOLUME - ADJUSTMENT BUTTON / LEFT ADJUSTMENT [5]
OSD MENU BUTTON [3]
UP ADJUSTMENT BUTTON [5]
DOWN ADJUSTMENT BUTTON [2]
INPUT SIGNAL (AV / PC / HDMI) SELECTION BUTTON [2]
BNC VIDEO INPUT [13]
AUDIO INPUT / OUTPUT (AUDIO PC) [11]
HDMI INPUT [8]
PC INPUT (VGA) [7]
POWER CONNECTOR (DC) [6]
Plug the power wire of the adapter provided into the respective DC.
ON/OFF BUTTON [7]
This is used to switch the monitor on and off. The green LCD lights up when the monitor is on.
IMPORTANT NOTE
If the following message appears on the monitor after pressing the button (7):
It means that a not connected video signal has been selected as input. To select the desired signal) press the button (
7
)
“AV/PC/HDMI” and select the desired item with the buttons (
5
-
6
) “DOWN” and “UP”. Press the button “VOL-” or “VOL+”
(
2-3
) to confirm. The type of selected signal will be displayed on the top left of the page.
IMPORTANT NOTE
If the input signal is not present, the OSD menu is not active.
NO SIGNAL
6
7
8
9
11
12
13
1
2
3
4
5
IN
OUT