URIPHON wireless 2, Инструкция по эксплуатации

Страница: 12 / 28

12
Preparing the Transmitter:
•
On the left side of the transmitter enclosure there’s an opening with a snap in
latch behind it and which allows to open the enclosure (Fig. 11a)
•
With a thin and spiky object (e.g. a paper clip) press against this latch and take
off the enclosure cover (Fig. 11a and 11b
•
With sliding switch next to the battery select vibration
alarm “On” or “Off”
(Fig.. 11c)
•
Push the CR2450 button battery into the battery holder.
Important: When inserting make sure the battery polarity is correct! (Fig. 11d)
•
Afterwards fit back the cover and close the cabinet again.
•
The Transmitter is now ready for use.
Fig. 11a: Opening of the Transmitter emclosure
Fig. 11b: Taking off the enclosure cover