URIPHON wireless 2, Инструкция по эксплуатации

Страница: 10 / 28

10
Starting the device:
Important note:
Neither the Transmitter and Receiver have an ‘On’ or ‘Off’ switch or
button. Once the batteries are inserted in both the Transmitter and the Receiver and
the Transmitter has been paired to the Receiver, the unit is ready for use.
Depending on the number of alarms triggered and the respective alarm duration, after
starting the device, the batteries are functional for several weeks before they have to
be replaced.
Preparation of the Receiver:
The Receiver can be powered using the power supply unit (fig. 9)
type SYS1421-0605-W2E, and also with two commercially available 1.5V AA batteries.
1 Battery operation
•
Open the battery compartment on the Receiver. To do this, slide the lid of the
battery compartment outwards, in the direction of the arrow. (Fig. 10a)
•
Insert two 1.5 V AA batteries. Important: When inserting, check the correct
polarity of the batteries! (Fig. 10b)
•
Close the battery compartment
•
The Receiver is now ready for use
Fig. 10a: Receiver, back with closed battery compartment