PV Module Installation Instructions
4
/
12
◇
When exposed to direct sunlight, a single module may produce more than 30V DC
voltage. The exposure with 30V or higher DC voltage has potential risks.
◇
The electric arcs may occur when disconnecting or linking the photovoltaic
modules exposed to the sunlight. This arc may cause burns, a fire or other problems.
◇
Do not disconnect the linking between the modules or between the modules and
inverters in case of the load.
◇
The photovoltaic modules could convert the power energy into DC power. The
modules could be applied for the ground, roofs, vehicles or boat and other outdoor
environment. It is system designer and installers’ responsibility to reasonably
design the support structure.
◇D
o not disassemble the modules or remove other attached brands or parts.
◇
Do not spray or glue on the upper and lower surfaces of the modules.
◇
Do not use the mirror or other magnifying glass equipment to concentrate the
sunlight artificially to the modules.
◇
It needs to comply with all the local, regional and national laws and obtain a
construction permit when necessary in the process of installing the system.
◇
It needs to keep the children away from the system when transporting and installing
mechanical and electrical components.
◇
During installation, it is necessary to completely block the modules with opaque
materials so as not to generate voltages that exceed the safety range of the human
body which may cause electric shock.
◇
Do not wear metal rings, watch straps, ear, nose, lip rings or other metal parts when
installing or inspecting the photovoltaic system.
◇
The qualified insulating tools are the only choice for the electrical installation
work.
