background image

Page 13

MX-HomePro MXHP-H500 (Hub)

Limited Warranty Statement

Click on the section title above to read the full terms and conditions of the Limited Warranty
Statement. Also available publicly on the URC home page.

End User Agreement

Click on the section title above to read the full terms and conditions of the End User Agreement.
Also available publicly on the URC home page.

Federal Communication Commission
Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one more of the following
measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

Warning!

Changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate the equipment.

Note:

 The manufacturer is not responsible for any Radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user's authority
to operate the equipment.

Содержание MX-HomePro


















Отзывы: