Urban Coop Company Backyard Chicken Coop, Руководство по сборке

Страница: 18 / 18

Big Space Top
Smaller Space Down
P1
P2
P3
Equal Spaced
P4
14
Round-Top Planter Box
(optional coop accesory)
P5
P5a
P6
P6
P7
Parts List:
1) Back Panel
2) Front Panel
3) Bottom
4) 1 5/8 Green T20 Screws
5) Longer Side Board
5a) Shorter Side Board
6) Bottom Side X2
7) 3” Brown T25 Screw
8) 3 ½” Green T25 Screw
9) 8 1/8” Gauge Block
P8
Note: Assembly will be easiest with two people and a flat table, like a picnic table . (1) Place P1 & P2 panel
top side down and screw bottom P3 onto it screwing 8 P4 screws through bottom into blocks on P1 & P2 sides.
Don’t screw in too deeply as it may crack the wood.
(2) Attach the P5 side board on the eggbox side of the planter and the P5a side board on the side of the planter
that has the roost door. Use the P9 gauge block to correctly space the top of the box and mount the P5 and P5a
boards using 4 P4 screws in each side making edges flush and positioned as illustrated. Discard P9 when done.
(3) Attach the P6 bottom side board below the P5 and P5a boards to fill the hole using 3 P4 screws each.
(4) Position the assembled planter box onto the coop in lieu of the side yard boards shown in step 10. Attach end
blocks of P5 and P5a to the roost and egg box using brown P7 screws and then sink one green P8 screw at an
angle into the pre-drilled holes in the block, driving them into the tops of the run top rails. Press down on side
panels to make sure they seat against the coop tightly.
P9
The Planter Box Replaces The D1, D2, D3 Yard Boards in Step
10
End Block
P4 Screws