29
6.0 SETTING UP THE HN4000
The HN4000 time clock allows users to punch in and out
with paper time cards. Before the employees can begin
punching, the administrator must set up the time clock for
use.
To get started, plug the time clock into a surge protector
or uninterruptible power supply (UPS). Then remove the
cover of the time clock using the enclosed key. You will
now be able to access the buttons and switches.
6.1 Overview of the HN4000
The
IN
and
OUT
buttons on the keypad will be used later
for punching in and out. These buttons are also used in the
setup of the clock. Once you have removed the cover, you
will see labels for the buttons. You will also have access to
the
Set
and
Battery
switches, which are located beneath
the labels.
The following switches and buttons can be found on the
HN4000 time clock keypad.
Set -/0
+
Enter
Back
Clear
Mode
Battery
Reset
ON-OFF
—
Switch
Function
SET
Enter and exit the setup mode (- /
0). When the
Set
switch is pushed
to the left (–), the clock is ready for
punching. When the
Set
switch is
pushed to the right (0), the clock
is in the setup mode and you can
begin setting up the menus.
BATTERY
Turns on/off the battery (left/right).
Содержание HN3000
Страница 1: ...HN3000 HN4000 Product Manual ...
