UPPAbaby Vista 2015, Руководство пользователя

Страница: 12 / 96

21 22
PUSHCHAIR OPERATION
REMOVING FABRICS FROM CANOPY
STEP 1: Lift canopy fabric up to view canopy support
frames and canopy mounting bracket from interior of
canopy.
NOTE: Front rounded canopy support frame ,
middle support frame and back support frame
attached to mounting bracket .
STEP 2: Flip canopy over to outside view. With a
small screw driver, push tabs in opening on hinges in
and pull canopy support frames
and out.
STEP 3: Remove back canopy support frame
from canopy mounting bracket by sliding it upward.
STEP 4: Sliding canopy fabric off of all three exposed
canopy support frames.
NOTE: Reverse steps when replacing canopy.
NOTE: Remove canopy from toddler seat prior to removing canopy fabric.
CAR SEAT ADAPTER OPERATION
FITTING ADAPTERS TO VISTA FRAME
To Attach: Place adapters (logo facing out) onto seat
attachments and press until you hear a click.
To Remove: Press button to lift from pushchair frame.
FITTING MAXI-COSI SEAT TO ADAPTERS
NOTE: The adapters are left and right specific.
Match the colored dot to the coordinating color dot on the pushchair chassis.
STEP 1: With infant car seat facing pushchair handle,
position above chassis aligning base of car seat
handle with adapters.
STEP 2: Push car seat onto adapter posts.
STEP 3: Make sure side lock tabs are engaged. Lift up
on car seat handle to check attachment.
To Remove: Simultaneously push release triggers
found on car seat located by inside of carry handle.
Compatible with the following Maxi-Cosi® infant car seats:
Citi®, Cabrio®, CabrioFix® and Mico® .
NOTE: Prior to fitting adapter to VISTA chassis, engage brake on VISTA and remove seat from chassis.
0185_VISTA-EU_V2.indd 21-22 9/4/14 11:22 AM