1. Battery Panel Functions
48V100Ah - Energy Storage Lithium Battery Module - User Manual
This RS485 interface is used for battery
and inverter communication
Battery anode:
Connects to the positive pole of inverter
Negative battery:
Connects to the negative battery of the inverter
Address dip switch:
identifies addresses when batteries
are connected in parallel
The two 485 communication ports
use a communication connection
between the batteries
State
RUN light: green LED flashing to show the battery running status.
RUN
Alarm light: The red LED blinks to indicate that the battery is alarming, and the red LED blinks to indicate that the battery
is protected, as shown in the following table.
Alarm
OFF
Flash 1
Flash 1
Light
Light
Light
OFF
OFF
OFF
Flash 3
OFF
Flash 3
OFF
Light
02
Off to Sleep
No Charge and Discharge
Charging Mode
Battery Running Status
ALM
RUN
Dormancy
Normal
Warn
Normal
Warn
Overcharge Protection
Temperature or Current Protection
Paseo de Extremadura, 39 - 28935 Móstoles - Madrid (Spain)
Tel. +34 918 021 649 - Fax. +34 917 750 542
www.masterbattery.es/en
