8 – Wireless thermostat 1 configuration
8
This parameter is only available if parameter 5 –
Thermostat selection is set to rF (Move PLUS only).
Register a wireless thermostat to the controller.
N OT E !
When registering a thermostat to the
controller (Move PLUS only), run mode
changes parameter
0 (type)
to
rEv
,
regardless of previous setting. Heating/
cooling is then controlled by the thermostat,
or the integrated system.
To register a thermostat:
1. Use buttons
-
or
+
to change the parameter to
INI
.
The controller is now set in wireless registration
mode.
8
2. Register the thermostat.
3. When the current room temperature is shown, press
the
OK
button to confirm the registration.
8
See section 6.9 Register a thermostat to the controller
for more information.
9 – Wireless thermostat 2 configuration
9
This parameter is only available if parameter 5 –
Thermostat selection is set to rF, and parameter 4 – Type
of system is set to 2P.1 or 2P.2.
Register a second wireless thermostat to the controller,
for use in systems with two circulation pumps (panel
heaters or fan coils).
N OT E !
When registering a thermostat to the
controller (Move PLUS only), run mode
changes parameter
0 (type)
to
rEv
,
regardless of previous setting. Heating/
cooling is then controlled by the thermostat,
or the integrated system.
To register a thermostat:
1. Use buttons
-
or
+
to change the parameter to
INI
.
The controller is now set in wireless registration
mode.
8
2. Register the thermostat.
3. When the current room temperature is shown, press
the
OK
button to confirm the registration.
8
See section 6.9 Register a thermostat to the controller
for more information.
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
5 0
U P O N O R S M AT R I X M O V E / M O V E P L U S · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L