Uponor Combi Port PRO, Инструкция по установке и эксплуатации

Страница: 6 / 36

3 Combi Port Base system description
Combi Port Base is a prefabricated heating cabinet suited for use in
multifamily houses or large residential buildings due to enormous
time and cost savings. The ready-to-install cabinet supplies domestic hot water and control of the domestic heating system, measurement
of heating energy and cold water consumption.
3.1 Operating principle
SD0000060
3.2 Functional description
In the Combi Port Base cabinet, the cold water is heated only when
required in the flow-through principle via a stainless steel high
performance plate heat exchanger. This always ensures a low return
temperatures on the heating water. The energy is supplied by heating
water with a flow temperature of at least 55 °C via the heating water
flow.
Domestic hot water: The domestic hot water is generated only on
demand. A mechanical proportional quantity control valve is
controlling the process. As more hot water is required, as more the
valve is opening the flow of the heating water through the heat
exchanger. This ensures a constant hot water temperature. If no hot
water is needed, the valve stops the supply of heating water through
the heat exchanger. It can cool down which is beneficial for the
hygiene.
Domestic heating: A hydraulic balancing of the domestic heating
circuit for hot water preparation within the heat interface unit can be
carried out with the control valves. The room temperature control is
carried out in the underfloor heating system in connection with either
Uponor Smatrix or Uponor Base flexiboard.
Ready to be installed
When delivered, the heat interface unit is ready for installation
according to customer speficications. Available for either in-wall or
on-wall mounting, for most common system installations and
installation situations.
6 | Combi Port Base | Installation and operation manual