UPM THM501, Руководство пользователя, Страница: 10 / 34

Cooling Program
Press MODE until the COOL symbol appears and repeat the programming procedure as you would for the
heating program.
-
Note: The same program times are used for heating and cooling. Therefore, any changes made
to the times here will affect the program times for the heating program.
- The setpoint temperature range is 8°C to 35°C (48°F to 95°F) for cooling.
Note: The PROGRAM key can also be used at any time to review all the set programs. To terminate
the programming sequence at any time, press HOME.
Tip: Press and hold down the AHEAD/BACK or UP/DOWN key to change the numbers quickly.
Copy Program Function
This thermostat can copy program settings from one day to another using the COPY key.
Make sure the thermostat is engaged in the program setting mode by pressing PROGRAM. The
SET PROGRAM symbol will appear.
Select the day you wish to copy by pressing WEEKDAY. Once selected, press COPY. The COPY
symbol will appear.
By default, the following day will appear flashing, designating the day to be copied to. If you wish
to copy to this day, press COPY again. If not, choose the desired day to be copied to by pressing
WEEKDAY, then press COPY. The program settings (HEAT and COOL) from the first day will now
have been successfully copied to the day selected. Repeat these steps for each day you wish to
copy.
8