Table Assembly Instructions
Step 1 - Inventory of Parts
A. For ease and safety, we recommend using two people for
assembly. Before assembly, consider where you want your table
to be located. Since your new table is height adjustable, you
will want it located a safe distance from anything that could
obstruct the table from being raised or lowered (like a wall-
mounted shelf or cabinet). With an Advanced Keypad, you can
set the upper and lower height limits for your table to avoid any
potential collisions.
B.
To avoid any damage to your floor or tabletop, we recommend
assembling your table on a debris-free carpet or blanket.
C.
Ensure you have received all components and hardware before
disposing of any packing material. Lay out the components
from all boxes and make sure the items and quantities match
what is shown in each of the package contents sections in
these instructions.
D. The included Allen Wrench Handle
(H15)
provides increased
leverage and better grip while tightening frame screws. Insert
the 4 mm Allen Wrench
(H6)
into the side marked with the
number “4”. Push the Allen Wrench all the way into the slot of
the handle until it “snaps” securely into place.
Step 3 - Adhesive Pad Application
A. Peel the backing off of four Adhesive pads
(H12)
and place onto
one of the Side Brackets
(P4)
on the side adjacent to the UPLIFT
DESK logo plate where shown.
B. Repeat for the second Side Bracket.
P2
P4
H12
H1
H1
P1
Step 2 - Crossbar End Attachment
A.
Place one of the Crossbar Ends
(P2)
upside down as shown.
B. Position one of the Legs
(P1)
so that the back of the leg and the back
of the Crossbar End are aligned and flush.
C.
Using the 4 mm Allen Wrench
(H6)
, loosely insert four M6x10
Machine Screws
(H1)
through the Crossbar End holes and into the
leg as shown, but do not tighten them.
D. Once all four screws have been started, tighten them using the Allen
Wrench.
E.
Repeat this step for the remaining three Legs and Crossbar Ends.
