© UPLIFT Desk
• 800-349-3839 • 512-614-3152 • [email protected] • upliftdesk.com
8
Use Single row end feet at “A” locations, facing inward.
Use Single row center feet at “B” locations, facing in-
ward.
Use Dual row end feet at “C” locations, perpendicular
to the rails.
Use Single row end feet at “A” locations, facing inward.
Use Single row center feet at “B” locations, facing in-
ward.
For non-linear configurations such as the C-Shape, H-Shape, 4-Pack, and Herringbone Shape, you will be
connecting Rail assemblies to other sides of the Square posts. Follow the same Rail extension attachment
process as shown in the section “Assembly - Linear Configurations” Step 3 (page 6).
The type of post feet used in non-linear configurations are dependent upon the type of desks used and
where the desk feet glides are.
Herringbone & C-Shapes
H-Shape
4-Pack
Assembly - Non-Linear Configurations
A
A
A
A
C
C
B
B
A
A
A
A
B
B
B
B
A
A
Use Dual row end feet at “A” locations.
Use Single row center foot at “B” locations, facing the
desks.
Use Dual row end feet at “A” locations.
Use a Dual row center foot at the center location, “B.”
4-Pack
Herringbone
H-Shape
C-Shape
A
A
A
A
B
