manualshive.com logo in svg

Uplift Desk FRM055, Руководство пользователя

Поделиться
Скачать
Uplift Desk FRM055 Скачать руководство пользователя страница 7

© UPLIFT Desk

 • 800-349-3839 • [email protected] • upliftdesk.com

AI-FRM055-2.2

90.014.01.0469 v.C

CAUTION:

 Read all instructions before assembly. Failure to assemble or operate properly may 

result in damage or personal injury. Retain manual for future reference.

CAUTIONS & WARNINGS

!

!

CODE

DESCRIPTION

TROUBLESHOOTING SOLUTION

H01

Overheated

The desk motor has a 10% duty cycle to protect it from 

overheating. For example, in a 20 minute period, if your desk 

motor is activated for 2 minutes, you will want to let it rest 

for 18 minutes. Otherwise you may see an H01 code on your 

keypad.

E01-E06

Firmware 

or connectivity 

issues

Check all cables to ensure they’re all firmly plugged in, and 

perform the Reset procedure on Page 1, Step 3.

E07-E012

Legs are uneven

Perform Reset procedure on Page 1, Step 3.

I

f the error message persists after performing the Reset Procedure or if there is a height dif-

ference between the legs which exceeds 1.5’’, refer to the Desk Reset + Troubleshooting Steps 
page at the URL shown below.

https://www.upliftdesk.com/uplift-desk-troubleshooting-and-reset-instructions/

For more troubleshooting information, visit the Desk Reset + Troubleshooting Steps at the URL below.

https://www.upliftdesk.com/uplift-desk-troubleshooting-and-reset-instructions/

Troubleshooting

If your desk does not respond when you try to raise 
it or lower it or if the Keypad displays error messages 
(“E01” through “E12”), check to make sure all the ca-
bles are secure (cables to the legs and cables to the 
control box).
If the problem persists, follow the steps below.

 

•  Unplug the power cord and press down on the 

Paddle for 30 seconds.

 

•   Plug the power cord back in.

 

•   Perform the Reset Procedure outlined on Page 2 

Step 6 of these installation instructions.

Note: If the desk is unplugged or if you lose power, 
you may need to perform the Reset Procedure.

E07

!

Содержание FRM055








Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды