UP Profile 2 - 20, Руководство владельца и сервисная книжка

Страница: 20 / 42

___________________________________________________________________________
Closing the Inner Container
The closing flap of the inner container is secured, first in the middle, by looping the
excess 50cms of line though the closing rubber band. Then loop it through first the
right, then the left side (Picture 7). Take care to keep the lines well sorted, with each
line matching the others in the length of the loop passed through the rubber bands.
Picture 7
Closing the outer container
Harnesses with built-in reserve
Almost all modern paraglider harnesses have a built-in container for the reserve
parachute. We recommend always using this container for your UP Profile 2 parachute.
When installing the UP Profile 2 in the harness, please follow the instructions delivered
with your harness. This is also the place to look for information regarding the closing of
the outer container. Further info to this topic in the “Installing the reserve in a harness”
chapter.
Harnesses with no built-in reserve container
For harnesses with no built-in reserve container UP offers two different outer container
solutions, the best one being the front-mounted container, and a universal container for
mounting on either side of the harness.
When using the universal container please note the following:
Excess reserve bridle is stored inside the outer container in neat S’s, and then the
bridle is routed out of either the upper left or the upper right corner of the container,
depending on how you intend to attach the container to your harness.
The inner container is placed on top of the bridle S’s with the opening facing
downwards, and the drogue chute neatly draped around it. Make sure the loop where
the deployment handle is attached is in the middle, and facing upwards.
20