Industrial/EasyLAN 100i Interface Kit for XP – Installation Instructions Ed. 1
16
Chapter 4 EasyLAN 100i Setup
Setup Mode Overview
The diagram below illustrates the hierarchy of setup options
that are added to the Setup Mode when an EasyLAN 100i
interface board is installed in the printer.
Like most other options in the Setup Mode, these options can
be changed using setup strings and fi les or read using SETUP
WRITE statements.
• Press Setup key to exit the Setup Mode.
SETUP:
NET-COM, NET1
SETUP:
PRINT DEFS
SETUP:
MEDIA
SETUP:
FEEDADJ
SETUP:
SER-COM, UART1
Standard Setup Mode
See diagram #2 in printer's
Installation & Operation Manual
Standard Setup Mode
See diagram #1 in printer's
Installation & Operation Manual
Use keys . and 0–9 to set IP address
manually. Use C-key to erase.
Use keys . and 0–9 to set netmask
manually. Use C-key to erase.
Use keys . and 0–9 to set default router
manually. Use C-key to erase.
Set addresses manually
Select character(s) specifying
new line in data sent from
EasyLAN 100i pcb.
Read received addresses
First displayed option
indicates current setting.
Use F4 or F5 key to scroll
First displayed option
indicates current setting.
Use F4 or F5 key to scroll
NETWORK:
IP SELECTION
SETUP:
NETWORK
NETWORK:
IP ADDRESS
IP ADDRESS:
192.168.1.79
NETMASK:
255.255.255.0
NETWORK:
NETMASK
NETWORK:
DEFAULT ROUTER
DEFAULT ROUTER:
192.168.1.1
RARP
BOOTP
DHCP
IP SELECTION:
MANUAL
CR
LF
NET-COM,NET1:
NEW LINE
NEW LINE:
CR/LF
Read addresses
F4
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Setup
Enter
Enter
Enter
F5
F4
F5
F5
F5
F5
F4
F5
F4
F5
Caution!
Making selection using DHCP, BOOTP, or RARP and trying to
keep the received IP-address by manual may cause IP-confl ict
later on. Instead, contact your network administrator to get a
fi xed IP address.
