![UNMAK UKY/Y 100 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/unmak/uky-y-100/uky-y-100_user-manual_1059766007.webp)
P a g e
| 6
Hot Water Boiler with Steel Body, Automatic Fuel Feed Operation and Maintenance Manual
SAFETY PRECAUTIONS
The electrical installation of this product must be performed by qualified personnel in
accordance with the instructions given in this manual and in accordance with applicable
local or national regulations.
THIS PRODUCT MUST BE CONNECTED TO THE ELECTRICITY WITH EARTH LINE!
The boiler must be connected to a chimney in accordance with the specifications specified in the
operating instructions and the relevant regulations. The chimney must provide the traction value
required by the connected boiler. Your boiler should not be operated without a chimney connection
and there must be enough traction to burn. In chimneys where sufficient traction is not ensured, the
boiler must never be operated. Any installation in the place where the boiler is installed should not
be installed.
In case of boiler changing in the boiler room, the old boiler must be removed or disconnected from
the chimney and the insulation
must be sealed and insulation
should be made. In no case
should more than one boiler be
connected to the same chimney.
The cylindrical chimney can be
passed through the chimney in
the figure.
Smoke chimneys should not be placed on the outer wall of the building unless it is a technical
requirement. The wall thickness of the chimney walls should not be less than a brick thickness. For
chimney construction, hollow bricks and briquettes should never be used. It should be plastered
inside and outside of the rectangular chimney.
It should be ensured that fresh air is continuously introduced into the area where the boiler is
installed. Reference must be made to the dimensions specified in this manual. The boiler should
never be installed in living spaces or in a place directly connected to such a place. In order to reduce
the risk of scaling and corrosion in old and new installations, the instructions given in the relevant
section of this manual should be applied by the installer who installs the boiler. In particular, if the