P a g e
| 5
Hot Water Boiler with Steel Body, Automatic Fuel Feed Operation and Maintenance Manual
All electrical and water installations must be carried out by
authorized plumbers, in compliance with all applicable legal
and technical rules, by the relevant regulatory authorities.
The fuels to be burned in the boiler should be kept at a
distance of at least 800 mm. It is recommended to store fuels
in a separate space.
Boilers must be installed on a concrete base 10 cm above the base to protect the solid fuel from the
moisture of the water. The concrete base prevents the fan from absorbing fuel or ash dust in the
ground.
Lying of tiles with tile and tile stones facilitates cleaning.
It is inconvenient to have flammable, caustic and flammable materials in the boiler room.
Mounting dimensions:
The boiler room must be of a size to provide the
minimum dimensions given in the picture below.
When the boiler is placed, it can be done easily to
add to the hopper, the reducer and shaft
underneath the hopper can be easily removed,
enough distance should be left for the service to
work comfortably.
Dimension A: 60 cm greater than the opening of
the boiler door;
Measure B: Select the spindle removal distance.
If the above measurements are observed, a minimum of 8 m3 of volume requirement in the
regulations is ensured.
There should be no faulty and unsafe power lines in the boiler room.
The 230 V electrical connection from the control panel must be connected to the mains via
the W automaton.
