background image

P a g e

 | 14

 
 

 

Manuel Fuel Feeding, ÜKY/W Hot Water Boiler User Manual 

MAINTENANCE AND BOILER CLEANING 

For your system to work efficiently, regular maintenance is required by specialist teams according to 
the manufacturer's instructions. 
 
Regular checks: 
• The water level should always be checked. The hydrometer (water level indicator) should be 
marked after the first filling of the system. If water level or pressure drops below the static pressure 
or system setting, water addition (boiler cold) must be done to the system. To protect the system 
and the boiler from corrosion, the water to be fed into the system needs to be softened according to 
local settings. 
• Check that the front doors are closed properly, and if necessary, the door wickets should be 
replaced. 
• Check that there is a gas leak from the chimney connection. If there is a leak, it must be repaired. 
• Boiler heating surfaces should be checked. The formation of the corporation depends on the type 
of fuel used and the amount of combustion air. If it is understood that the outlet water temperature 
can not rise to the usual values in usual conditions, the boiler surfaces are treated, the heat transfer 
surfaces of the boiler should be cleaned. 
 
Boiler cleaning: 
It should be done when the boiler is cold.  
 
To clear the boiler: 
• Clean between the water jackets with the help of a spatula.  
• Bitumen on the walls of the boiler forms a layer, which will prevent the energy that is released in 
the boiler from passing through the water, thus resulting in low efficiency. To prevent this, all heating 
surfaces should be cleaned regularly with the help of a spatula or as required. 

• Boiler outer cover sheets can be cleaned as needed. 

 

Maintenance: 
The  system  has  a  contracted  service  before  each  working  season;  We 
strongly  advise  you  to  call  our  authorized  service  to  check  the  boiler, 
fittings,  electrical  connections,  syringe.  Never  do  maintenance  work 
without the help of an expert. 
 
 
 
 
 
 

 

Chimney cleaning should be done by a firm that has successfully passed certification training 

in your city organized by the fire department chairs. 

 

 

Содержание UKY/W


















Отзывы: