GB - 10
SETTINGS
Play back music and picture file simultaneously
1. Listen to music referring to steps 1-3 above.
2. Press
BACK
button repeatedly to go back to main menu.
3. Select “Pictures” icon under main menu and press
OK
to confirm. View a picture or start slide-show referring to operations
in section “Pictures”.
VIDEO
This unit can play MP4 files via SD/MMC card.
1. Select “Video” under main menu and press
OK
to confirm. The content list of
MP4 files will be displayed.
2. Use
UP
or
DOWN
button to select the file that you want to play , then press
OK
to confirm the selected file and start playback
3. When a video file is playing, press
OK
button once, the function key icons will
appear on the left side of the LCD display. For operation, refer to step 4 in
section “ MUSIC “.
Note: If no button is pressed within 3 seconds, the function key icons will disappear.
Select “Settings” under main menu and press
OK
to enter submenu.
1 ) Syatem
Select “System” and then press OK to conform.
4. When a music file is playing, press
OK
button once, the function key icons will appear on the left side of the LCD display.
Select the function icon you want and press
OK
button to confirm.
pause playback
skip to previous song
skip to next song
repeat playback
Note:
“Repeat all” when the icon does not appear on above the procession bar.
“Repeat one” when the icon appears on above the procession bar.
accelerated fast backward
accelerated fast forward
start playback
a.Song title b.Artist name c.Album title
d.Elapsed time e.Total time f.Prigression bar
GB - 3
POWER SUPPLY
This set operates on AC 110-240V~ 50/60Hz or DC 6V (4x1.5V R14/UM-2/”C” batteries).
AC operation
The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V~ and should only be connected to a mains
supply within these parameters.
Connect the AC adaptor (provided) to DC 6V IN jack on right side of unit before plugging into a convenient standard AC
outlet.
Cautions:
•
Use only the included AC adaptor. Use of any other adaptors could damage the unit.
•
The AC adaptor included with this unit is for its use only. Do not use it with other equipment.
•
When the unit is not going to be used for long time, disconnect the AC adaptor from the AC outlet.
DC operation
This unit can be operated by 4x R14/UM-2/ “C” batteries (not supplied).
Installing batteries
1. Remove the door of the battery compartment
2. Before inserting the batteries, observe the polarities (+ and -) of the battery, then relate the polarities to the engraved
diagram on back of unit, Insert 4x R14/UM-2/ “C” batteries (not supplied) into the compartment.
3. Replace the battery door.
Notes on batteries:
- Before throwing any batteries away, consult your distributor who may be able to take them back for specific recycling.
- Do not mix different types of batteries or old batteries with new ones.
- Never recharge the batteries , apply heat to them or take them apart.
- In order to avoid leakage, always remove the batteries when unit will not be used for a long period of time.
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
If at any time in the future you should need to dispose of this product please note that Waste electrical products
should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local
Authority or retailer for recycling advice.(Waste Electrical and Electronic Equipment Directive)
FIRST START
You need to set the unit’s operation language, time zone, time and date when
operate the unit for the first time.
Press
UP
or
DOWN
button to select one of the available languages and
press
OK
button to confirm and go to time zone setting.
Press
UP
or
DOWN
button to select your desired time zone and press
OK
button to confirm and go to time and date setting.
DRM-2472 IB UNIW 001 REV0 - GB.p65
2009-3-19, 18:53
5
