INSUHF0518
6
D
D
C
C
2
1
4
B
A
3
VERTICAL
INSTALLATION
HORIZONTAL
INSTALLATION
4
PREPARING THE FAN HEATER
ATTENTION : Be sure to push in the right hole by placing
the back box in the correct direction. The notches will be
positioned at the bottom [C], or at the right [D].
1. Pivot the fan heater’s front
panel toward the top of the
unit [1] and slide it up. Remove
the front panel completely [2]
and place it on a clean surface
where it won’t be damaged.
2. Remove the two screws.
Keep the screws with the
front panel.
3. Lift the top [3] of the mecha-
nical housing [A] and slide it
[4] to remove it from the back
box [B].
4. Perforate one of the six pre-cut holes.
Choose the hole according to the power
cable’s position in the wall and the
available space.
