INSUHF0518
10
MAINTAINING THE FAN HEATER
FOR THE WARRANTY TO BE VALID, THE FAN HEATER’S AIR INLET AND OUTLET
MUST BE CLEANED REGULARLY.
USING AND MAINTAINING THE FAN HEATER
CONTROLING THE FAN HEATER
According on your model, see the table below for how to control your fan heater.
UHF1002WCW
With a compatible wall thermostat to adjust the room’s temperature
setpoint
---
UHF1002TTW
With its integrated mechanical thermostat and timer
• The temperature setpoint is controlled with the knob with settings from
1 to 5, where 1 represents the minimum amount of heating and 5, the
maximum.
• The timer knob lets your fan heater run continuously at maximum
heating mode for a set period (0 to 30 minutes). Ideal for use when
taking a shower.
WARNING: Before using your fan heater, make sure that it has been installed by a certified electrician in accordance with
the electrical and building codes in your area.
Do not operate without front panel.
WARNING: Cut off the power at the breaker or fuse
before cleaning the unit. High voltage and the risk
of electric shock are present in the unit even if the
thermostat is set to off. Therefore, you can receive an
electrical shock as long as the unit is under power.
Over time, cigarette smoke may cause the outlet grill to yel-
low. The best way to prevent yellowing is to clean the unit
regularly.
Dust the front panel with a soft cloth and clean it with a damp
cloth only. If you use cleaning products, they could cause the
heater to yellow.
If the unit is installed in a very dusty location, use the dust
brush of a vacuum cleaner to remove dust and other foreign
objects.
When maintaining the product, never use:
• A brush or metal scrubbing pad
• Chlorine
• Abrasive cleaning products
• Hydrochloric acid-based products such as bleach
• Any other cleaning products that bear the following
symbols:
