Univex SRM12, Руководство по запчастям и обслуживанию

Страница: 17 / 41

POWER TAKE-OFF ASSEMBLY (OPTIONAL):
(Figure 6)
1. Remove the retaining ring (figure 6 [16]) from the end of the PTO shaft and remove the
spur gear [15] and key [14] from the shaft.
2. Remove the three 1/4-20 hex head cap screws [9 & 18]), Washers [7 & 8], deflector [6]
and withdraw the power take-off assembly from the transmission housing.
Bevel Gear
1/4-20 Hex Head
Cap Screws
Spur Gear
Page 3.7
Power take-off assembly
Power Take-Off
Housing
Bevel Gear
Power Take-Off Shaft