Univex RDRE Series, Инструкция по эксплуатации

Страница: 32 / 44

RDRE - electric version - gas version - Page 30
1 2
Fig. 1 – Set the desired timers (max 59 minutes each),confirming each value with the button . After having
set the desired timers, scroll the remaining ones with the arrows buttons until the parameter Temperature is
visualized . After that, save all settings with the button . When the program will start with the button ,
the timers will start counting
(Fig. 2)
. The timer of a different colour will be the first to end and will correspond to
the tray number to be pulled out. At the end of each counting the chamber lights light and the acoustic signal is
activated. Open the door and pull out the tray.
ATTENTION: the baking with the next timer will start only when the door will be closed. If the door will still be
open, the oven will remain in stand-by.
During the baking program execution, it is posible to add other timers, modify the ones already set up, or exit the
Multi mode by pressing the button “Modify” .
In case the Multi mode needs to be canceled by the program (also in case of running baking),enter the Settings
menu
and in the Time parameter scroll the Slider to pass from “Multi” mode to a specific time.
EXECUTION OF A MANUAL PROGRAM
After having completed the Manual programming press the button to start the chosen baking cycle. On the
display following screen will appear:
When the program starts the icons in the bottom change and refer to the baking parameters. These
parameters are always modifiable also during the baking cycle.