Univex RDRE Series, Инструкция по эксплуатации

Страница: 23 / 44

RDRE - electric version - gas version - Page 21
HOW TO SET A MANUAL PROGRAMME:
From the Main Menu, go to “Manual” and press the key
Then press the
key to enter the programming mode.
The first setting to appear is the
preheating
option. Scroll down the " + " and " - " keys to display "YES" or "NO",
depending on whether you want to preheat the oven before executing the set programme. Press the key to
confirm the desired mode and jump to the next step.
1.
Setting the cooking time or Multi-Timer mode:
The “clock” symbol (display 1) will begin to flash. Set the desired hours and minutes using the “ + ” and “ - “
keys. By pressing the “ - “ key in addition to the value “0”, the time will be infinite. Press the key to
confirm the parameter.

Multi-Timer mode:
You will have up to 10 programmable timers (depending on the pans), which will act solely and exclusively
on a single baking programme (manual or preset). Useful for cooking different products at the same
temperature and climate, but with different times.
Press the " - " key beyond the value "0" to set the "infinite" mode. Press the key to enter the Multi-Timer
mode, signalled by the appearance of the word "Multi" beside display 1. Display 4 shows the sequential
number of the timer during programming. Use the " + " and " - " keys to set the desired minutes and press the
key. This will take you to the next timer to be set. Set the desired timers, press to save the settings
and jump to the next step. At the execution of the baking programme, the sequence of the set timers starts
from the shorter setting.
At the end of each count, the lights inside the chamber are turned on and the buzzer is activated. Open the
door and remove the pan.
Please note that only when the door is closed, will the oven automatically resume baking by the setting
of the next timer. If the door is opened, the oven will remain in stand-by mode.
If necessary, you can add other timers during the baking programme. Proceed as follows:
during the execution of the programme, press the
key until the first timer is available. Press the key
and, through the " + " and " - " keys, set the desired time for the additional timer. If you want to set other timers,
push the key and proceed as described above. If, on the other hand, you want to go back to the current
programme with the additional changes made, press the key.
Note: to exit the Multi-Timer mode while cooking is in progress
,
press the key and set a specific
time you want. Press the key and the programme will run in the traditional manual mode, resetting
the set timer and exiting the Multi-Timer mode.
2.
Setting the fan speed:
After setting the time parameter, you will switch to the fan speed setting:

5 – high speed

4 – medium speed

3 – low speed

2
– medium semi-static speed

1 – low semi-static speed