Univex RDRE Series, Инструкция по эксплуатации

Страница: 31 / 44

RDRE - electric version - gas version - Page 29
Fan Speed parameter – it manages the set up of the desired fan speed for the baking mode to be used:
 5 – high speed

4 – medium speed

3 – low speed
 2 – medium speed, semi-static

1 – low speed, semi-static
The semi-static mode stops the fans once the set-point temperature is reached and reactivates them at every
starting of the heating elements, so that the temparature in the baking chamber remains constant. In this mode
the User will obtain a baking result comparable to a baking in a static oven. The use of the semi-static mode will
be underlined by the lighting of the writing “ Pulse ” on the display.
Climate parameter – this parameter manages the level of steam injection related to the baking cycle,
and will therefore create a dry or humid climate in the baking chamber accordingly to the User’s needs.
Steam Injection parameter – this parameter allows to obtain a temporized steam injection in every
moment during the baking cycle on User’s request.
MULTI-TIMER MODE
Multi-Timer:
in this mode it is possible to find 10 programmable timers that will act only and exclusively on a single baking
program.
It is very useful to bake different products at the same temperature and climate but with different baking times.
The oven will reach the set temperature and climate, than the timers will independently regulate the different
baking cycles. When the last set timer will expire, the oven will continue keeping constant the values of
temperature and climate set during the programming phase.
In the “Manual” menu select Settings
.
When the value time is reached, scroll with the Slider over the 0, so that the function Multi is visualized:
Confirm the selection with the button .