Univex PREP SAVER 6512 SERIES, Инструкция по эксплуатации

Страница: 14 / 21

6512
KNIFE, PULLEY AND MOTOR ASSEMBLIES
FIGURE 3
ILLUS. NO. PART NO. DESCRIPTION QTY.
1 6512020 HOUSING, TOP 1
PULLEY ASSEMBLY INCLUDES NO. 2 THRU 8
2 6512021 SHAFT, PULLEY
1
3 6512043 SNAP RING, PULLEY
1
4 6512022 SPACER, PULLEY
1
5 6512044 BEARING, PULLEY
2
6 6512023 PULLEY
1
7 6512045 SEAL, PULLEY
1
8 6512024 INSERT, PULLEY
1
9 6512025 GUARD, PROTECTIVE 1
10 6512026 GUARD, KNIFE 1
11 6509014 SCREW, M5-0.8 X 10 FLAT HD SLOTTED 5
12 8512228 BLADE 1
13 1204003 SCREW, M5-0.8 X 20 FLAT HD SLOTTED 2
14 8512229 SCREW, FLAT HD PHIL 7
15 6512027 GUARD, BELT 1
16 6512055 BELT 1
17 6509005 SET SCREW, M8-1.25 X 10 CUP POINT 2
18 6509103 COLLAR, MOTOR ADJ. 1
19 6509104 SPRING, MOTOR ADJ. 1
20 1200076 WASHER, NO. 10 FLAT 2
21 1200060 NUT, 10-32 HEX 2
22 6509041 WASHER, M6 FLAT 1
23 1204006 SCREW, M6-1.0 X 18 SOC HEX HD 1
24 6512046 GROMMET, RUBBER 1
25 6512028 BRACKET, MOTOR ADJUST 1
26 6512029 ROD, MOTOR ADJUST 1
27 6512050 MOTOR, 115V, 60HZ, 1PH, 1/3HP 1
6512053 MOTOR, 230V, 60HZ, 1PH 1
6512051 MOTOR, 230V, 50HZ, 1PH 1
28 1204008 BOLT, HEX HD 1
29 6512030 HOUSING, BASE 1
30 1204005 SCREW, M6-1.0 X 20 SOC HEX HD 4
31 6509017 KNOB, KNIFE GUARD 1
32 6509016 SHAFT, KNIFE GUARD 1
Page 13