High-power LED lighting system powered by rechargeable Li-ion batteries, with intensity adjuster and
Bluetooth remote control
Technical specifications:
- Power supply: 1 Li-ion rechargeable battery
- Autonomy at max power: >8 hours
- Recharge time: approx. 7.5 hours
- Colour temperature: 5,700K
- Max luminosity: 45000 lx
- Battery charger power supply unit: 100-230V~, 50-60 Hz
- Environmental conditions: USE Tempe10 °C to +30 °C Relative humidity 30% to 75% TRANSPORT
AND STORAGE Temperature -10° to +50°Relative humidity 10% to 80%
- Conformity: CEE 93/42, EN60601-1 3rd edition, EN60601-1-2:2007,EN62471 1st edition, directive
2014/53/EU, EN62479:2010, EN301 489-1 v1.9.2, EN301 489-17 v2.2.1, EN300 328 v1.9.1, CFR title 47 part
15, CFR title 47 part 15.247, ICES-003 issue 5 2012, RSS-247.
WARNING
Attention, failure to follow these safety instructions could lead to fire, electric shock, injury or damage to
the LED lighting system or to other property. Carefully read the following warnings before using the LED
lighting system. Do not use the device if it has been damaged. Do not tamper with or disassemble any
component of the system. Do not open the controller and do not attempt any repair operation. Do not
attempt to replace the battery. Do not expose the lighting system to conditions that may ignite the battery.
Avoid contact with sources of heat or naked flames. Do not use in spaces with flammable anesthetic
mixtures.
When the LED lighting system is not used store it in its container. Do not immerse any component in liquid
substances. Prevent liquid substances from entering the slots or the connection port. Do not look directly at
the light emitted by the LED nor direct the light to the eyes of the patient. Never place magnifying glasses
or other optical systems in front of the light. Use exclusively the components provided: do not combine the
components of the system with other lighting systems or electronic equipment. Use only the charger power
unit supplied. Field of application: the device is intended for use during medical examinations and therapy.
For internal use only.
DESCRIPTION OF DEVICE
The LED system (Light Emitting Diode) Univet EOS HP is a portable lighting device that can be worn by the
operator to illuminate the visual field during the execution of work. Thanks to its structure, the LED EOS HP
can be easily hooked up to all models of magnifying devices manufactured by Univet, thus providing an
integrated vision system.
The Li-ion battery with high capacity supplied with the device allows full autonomy to the user, ensuring
constant illumination for at least 8 hours.
It is recommended to perform a full charge cycle before using the device.
