31
NOTE
: Ensure any existing remotes are present when
pairing to vehicle.
1. Fasten seat belts and close all doors.
2. Turn ignition from
OFF
to
RUN
4 times within 6
seconds, with the 4th time ending in
RUN
(
OFF
is
the position where you can remove your key,
RUN
is the position just shy of starting your car).
3. Turn ignition to
OFF
. Acoustic signal will sound to
FRQ¿UP
PAIRING MODE.
4. Within 10 seconds, press and hold any button
RQWKH¿UVWUHPRWH:DLWIRUDFRXVWLFVRXQGDQG
NOTE
: Ensure any existing remotes are present when
pairing to vehicle.
1. Turn ignition from
OFF
to
RUN
8 times within
10 seconds, with the 8th time ending in
RUN
.
'RRUORFNVZLOOF\FOHWRFRQ¿UP
PAIRING
MODE.
2.
:LWKLQVHFRQGVSUHVVDQ\EXWWRQRQWKH¿UVW
UHPRWH'RRUORFNVZLOOF\FOHWRFRQ¿UPSDLULQJ
3. Within 20 seconds, press any button on the
second remote. Door locks will cycle again to
FRQ¿UPSDLULQJ
4. Turn ignition to
OFF
. Locks will again cycle to
indicate end of
PAIRING MODE.
5. Test all remotes.
NOTE
: Ensure any existing remotes are present when
pairing to vehicle.
1. Close all doors and then open driver’s door and
press the
UNLOCK
button on driver’s door panel
while door is open and insert key in ignition.
2. Turn ignition from
OFF
to
RUN
8 times within 10
seconds with the 8th time ending in
RUN
. Door
ORFNVZLOOF\FOHWRFRQ¿UP\RXDUHLQ
PAIRING
MODE.
3. Within 20 seconds press any button
RQ¿UVWUHPRWH
4.
'RRUORFNVZLOOF\FOHWRFRQ¿UPSDLULQJ
5. Within 20 seconds, press any button on second
UHPRWH'RRUORFNVZLOOF\FOHDJDLQWRFRQ¿UP
pairing.
6. Turn ignition to
OFF
. Locks will again cycle to
indicate end of
PAIRING MODE.
7. Test all remotes.
PAIRING
18
16
15
NOTE
: Ensure any existing remotes are present when
pairing to vehicle.
1. Turn ignition from
OFF
to
RUN
4 times within 3
seconds, with the 4th time ending in
RUN
. Door
ORFNVZLOOF\FOHWRFRQ¿UP
PAIRING MODE.
2.
:LWKLQVHFRQGVSUHVVDQ\EXWWRQRQWKH¿UVW
UHPRWH'RRUORFNVZLOOF\FOHWRFRQ¿UPSDLULQJ
3. If applicable, within 20 seconds press any button
on the second remote. Door locks will cycle to
FRQ¿UPSDLULQJ
4. Turn ignition to
OFF
. Door locks will cycle to
indicate end of
PAIRING MODE.
5. Test all remotes.
17
4. A chime will sound within 3 seconds to
indicate that the vehicle has entered
remote
PAIRING MODE.
5. Within 30 seconds of the chime, press any button
on all remotes to be paired including previously
paired remotes. A chime will sound after each
remote is paired.
6. Turn ignition to
OFF
and remove key.
7. Test all remotes.
ZDUQLQJODPSWRÀDVKFRQ¿UPLQJSDLULQJWKHQ
release button on remote.
5. Wait 2 seconds but within 10 seconds repeat
Step #4 for all other remotes. If you only have one
remote then continue to Step #5.
6. Turn ignition to
RUN
or wait 10 seconds to end
PAIRING MODE.
7. Test all remotes.
