![UniversalCarRemote Universal Car Remote Скачать руководство пользователя страница 28](http://html.mh-extra.com/html/universalcarremote/universal-car-remote/universal-car-remote_user-manual_1059432028.webp)
28
NOTE
: Ensure any existing remotes are present when
pairing to vehicle.
1. Using the working remote, press
LOCK
button 5
times at 2 second intervals to resynchronize remote.
2. Insert key into the ignition switch. Turn ignition to the
RUN
position (as far as you can go without cranking
engine). Wait for ignition chimes to stop.
3. Using the working remote, press and hold the
UNLOCK
button on the remote for 4 to 10 seconds.
4.
6WLOOXVLQJWKHZRUNLQJUHPRWHZLWKLQWKHVSHFL¿HG
4 to 10 seconds, continue pressing the
UNLOCK
button and then press the
PANIC
button (on the
working paired remote) for 1 second and release
both buttons. A chime will sound to indicate that the
remote
PAIRING MODE
has been entered (allow 3
seconds for chime to sound).
5. Still using the working remote, within 30 seconds
of the chime, press and release the
LOCK
and
UNLOCK
buttons simultaneously then press and
release just the
UNLOCK
button. A chime will sound
indicating the remote has been paired.
6. Using the new replacement remote, press
and release the
LOCK
and
UNLOCK
buttons
simultaneously and then press and release just the
UNLOCK
button. A chime will sound. This remote
has now been paired.
7. For each additional new/replacement remote, press
and release the
LOCK
and
UNLOCK
buttons
simultaneously and then press and release the
UNLOCK
button. A chime should be heard after
each remote signaling it has been paired.
8. Turn
ignition
OFF
and remove key.
9. Test all remotes.
7
NOTE
: Ensure any existing remotes are present when
pairing to vehicle.
1. Remove the key from the ignition. Remove the
BCM PRGRM
fuse from the fuse panel. Use the
legend on the fuse panel to properly locate the
BCM
PRGRM
fuse. Fuse panel is accessed by opening
the front passenger door.
2. Close all of the doors.
3. Close the lift-gate.
4. Insert the key into the ignition, and turn to the
ACC
position.
5. Turn the key to
OFF
and then back to
ACC
within
1 second.
6. Open and close any vehicle door. A chime will
be heard when the system enters into
PAIRING
MODE.
7. Press and hold the remote
LOCK
and
UNLOCK
buttons simultaneously for 14 seconds. A chime will
be heard after successful pairing.
8. Repeat Step #7 for any other remotes.
9. Remove key from ignition.
10. Replace BCM program fuse that was removed
earlier.
11. Test all remotes.
NOTE
: Ensure any existing remotes are present when
pairing to vehicle.
1. Insert key into the ignition switch. Turn ignition to the
RUN
position (as far as you can go without cranking
engine). Wait for ignition chimes to stop.
2. Using any working remote, press the
UNLOCK
button for 4 to 10 seconds.
3.
:LWKLQWKHVSHFL¿HGWRVHFRQGVFRQWLQXH
pressing the
UNLOCK
button and press the
PANIC
button for 1 second and release both buttons at the
same time. A chime will sound within 3 seconds
to indicate that the vehicle has entered
PAIRING
MODE.
4. Within 30 seconds of the chime, press and release
the
LOCK
and
UNLOCK
buttons at the same time,
then press and release the
UNLOCK
button on
the same remote. A chime will sound indicating the
remote has been
PAIRED
.
5. Repeat Step #4 for any additional remotes. Turn
ignition to
OFF
and remove key.
6. Test all remotes.
8
9
PAIRING