Universal 79130 Скачать руководство пользователя страница 20

Страница: 20 / 36

Please contact Universal

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing address: Universal

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

FIGURE 8

Step 72.

Step 73.

Step 74.

Step 75.

Step 76.

Step 77.

Step 78.

Step 79.

Step 80.

Step 81.

Step 82.

NOTE:

The TOP CABLE (51) has an adjustment bolt at one end.

Place TOP CABLE (51) in groove of PULLEY (66), with HOOK end facing front, insert into bottom of PRESS TOP

FRAME (6) and fasten with 3/8” x 3” HEX HEAD BOLT (88), 3/8” WASHER (100), 3/8” BUSHINGS (76) and 3/8”

NYLON NUT (104).

Insert adjustment bolt of TOP CABLE (51) through slot in PRESS SUPPORT (13) and slot in PRESS UPRIGHT

(4).

Place TOP CABLE (51) in groove of PULLEY (66) and attach at top hole in PRESS SUPPORT (13) with 3/8” x 3”

HEX HEAD BOLT (88), 3/8” WASHER (100), 3/8” BUSHINGS (76) and 3/8” NYLON NUT (104).

Place TOP CABLE (51) in groove of PULLEY (66) and attach at top hole in PRESS UPRIGHT (4) with 3/8” x 3” HEX

HEAD BOLT (88), 3/8” WASHER (100), 3/8” BUSHINGS (76) and 3/8” NYLON NUT (104).

Place TOP CABLE (51) in groove of PULLEY (66) and attach at center hole in PRESS SUPPORT (13) with 3/8” x

3” HEX HEAD BOLT (88), 3/8” WASHER (100), 3/8” BUSHINGS (76) and 3/8” NYLON NUT (104).

Place TOP CABLE (51) in groove of PULLEY (66) and attach at center hole in PRESS UPRIGHT (4) with 3/8” x 3”

HEX HEAD BOLT (88), 3/8” WASHER (100), 3/8” BUSHINGS (76) and 3/8” NYLON NUT (104).

Place TOP CABLE (51) in groove of PULLEY (66) and attach at bottom hole in PRESS SUPPORT (13) with 3/8” x

3” HEX HEAD BOLT (88), 3/8” WASHER (100), 3/8” BUSHINGS (76) and 3/8” NYLON NUT (104).

Place TOP CABLE (51) in groove of PULLEY (66) and attach at bottom hole in PRESS UPRIGHT (4) with 3/8” x 3”

HEX HEAD BOLT (88), 3/8” WASHER (100), 3/8” BUSHINGS (76) and 3/8” NYLON NUT (104).

Place TOP CABLE (51) in groove of PULLEY (66) and attach to FLOATING PULLEY BLOCK (24) with 3/8” x 1-3/4”

HEX HEAD BOLT (91) and 3/8” NYLON NUT (104).

Place TOP CABLE (51) in groove of PULLEY (66) and attach at bracket on PRESS TOP FRAME (6) with 3/8” x

1-3/4” HEX HEAD BOLT (91) and 3/8” NYLON NUT (104).

T10

Insert adjustment bolt of TOP CABLE (51) through RING of SELECTOR PIN (48) and thread into SELECTOR ROD

Содержание 79130





































Результаты поиска

Содержание 79130

Отзывы:

Бренды по названию

Популярные бренды

Universal 79130, Руководство пользователя

Результаты поиска

Содержание 79130

Отзывы:

Бренды по названию

Популярные бренды