Universal 79130 Скачать руководство пользователя

Страница: 12 / 36

Please contact Universal

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing address: Universal

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

FIGURE 4

Step 25.

Step 26.

Step 27.

Step 28.

Step 29.

Step 30.

Step 31.

Step 32.

Step 33.

Step 34.

Step 35.

Step 36.

Step 37.

Step 38.

Step 39.

Step 40.

Push 45mm SQUARE PLUG (71) into end of ADJUSTABLE BACK ARM (20).

Thread SPRING KNOB (78) and SHORT POP PIN (79) into BASE FRAME (1) as shown.

Slide one FOAM PAD (59) onto end of each BOLSTER (33) and lock in place with 5/16” WASHER (LARGER) (107),

CAP FOR BOLSTER (74) and 5/16” x 1/2” INNER HEX HEAD BOLT (82).

Insert one BOLSTER (33) through ADJUSTABLE TUBE (17) and slide on other FOAM PAD (59) and lock in place

with 5/16” WASHER (LARGER) (107), CAP FOR BOLSTER (74) and 5/16” x 1/2” INNER HEX HEAD BOLT (82).

Pull out on SHORT POP PIN (79) and insert ADJUSTABLE TUBE (17) into BASE FRAME (1) and release POP

PIN at desired position to lock in place.

Attach LEG EXTENSION (18) to BASE FRAME (1) with 5/16” x 5/8” INNER HEX BOLTS (96), 5/16” SPRING

WASHERS (102), 5/16” WASHERS (SMALL) (101) and 1/2” AXLE (60).

Attach ROLLER BRACKET (27) to LEG EXTENSION (18) with 1/2” x 3-1/2” HEX HEAD BOLT (85), 1/2” WASHER

(99) and 1/2” NYLON NUT (103).

Insert BOLSTER (33) through ROLLER BRACKET (27) and slide on other FOAM PAD (59) and lock in place with

5/16” WASHER (LARGE) (107), CAP FOR BOLSTER (74) and 5/16” x 1/2” INNER HEX HEAD BOLT (82).

Push 25mm x 50mm END PLUG (69) into SEAT ARM (21).

Attach SEAT PAD (58) to SEAT ARM (21) with 3/8” x 1-3/4” HEX HEAD BOLT (92) and 3/8” WASHERS (100).

Attach ADJUSTABLE SEAT TUBE (23) to SEAT ARM (21) with 3/8” x 3” HEX HEAD BOLT (88), 3/8” WASHERS

(100) and 3/8” NYLON NUTS (104).

Pull out on SPRING KNOB (78), insert ADJUSTABLE SEAT TUBE (23) and release SPRING KNOB at desired

height to lock in place.

Attach BACK SUPPORT (26) to PEC DEC UPRIGHT (5) with 1/2” x 3” HEX HEAD BOLTS (86),1/2” WASHERS

(99) and 1/2” NYLON NUTS (103).

Thread SPRING KNOB (78) into BACK SUPPORT (26) as shown.

Attach BACK PAD (57) to ADJUSTABLE BACK ARM (20) with 3/8” x 1” HEX HEAD BOLTS (93) and 3/8” WASH-

ERS (100).

Pull out on SPRING KNOB (78) in BACK SUPPORT (26) and insert ADJUSTABLE BACK ARM (20) into BACK

SUPPORT and release SPRING KNOB at desired position to lock in place.

Содержание 79130





































Результаты поиска

Содержание 79130

Отзывы:

Похожие инструкции для 79130

Бренды по названию

Популярные бренды

Universal 79130, Руководство пользователя

Результаты поиска

Содержание 79130

Отзывы:

Похожие инструкции для 79130

Бренды по названию

Популярные бренды