Universal 79130 Скачать руководство пользователя

Страница: 10 / 36

Please contact Universal

Gym Equipment/FFA Corp. for missing or defective parts at one of the following:

Phone 1-800-

472-9856 or Fax 1-662-495-5038 or E-mail at [email protected].

Mailing address: Universal

Gym Equipment/FFA Corp. - 100 Tubb Ave. West Point, MS 39773.

Website www.universalgymequipment.com

FIGURE 3

Step 11.

Step 12.

Step 13.

Step 14.

Step 15.

Step 16.

Step 17.

Step 18.

Push 50mm x 75mm END PLUGS (68) into end of PEC DEC TOP FRAME (10) and PRESS TOP FRAME (6).

Push four PLASTIC GUIDE ROD HOLDERS (75) into holes in WEIGHT BASE (8) and WEIGHT TOP FRAME

(9).

Slide a RUBBER DOUGHNUT (65) about 3” onto one end of each GUIDE ROD (43) and insert into WEIGHT BASE

(8).

Slide the WEIGHTS (46), one at a time, down the GUIDE RODS (43).

Insert the SELECTOR ROD (37) through the center hole of the TOP WEIGHT (47) and fasten through top hole of

SELECTOR ROD with TOP PLATE BOLT (81).

Slide TOP WEIGHT (47) down GUIDE RODS (43) and insert SELECTOR PIN (48) through desired WEIGHT (46)

and SELECTOR ROD (37).

Slide WEIGHT TOP FRAME (9) down onto GUIDE RODS (43) and attach to REAR UPRIGHT (3) with 1/2” WASH-

ERS (99) and 1/2” NYLON NUTS (103).

Attach PEC DEC TOP FRAME (10) to WEIGHT TOP FRAME (9) with 1/2” WASHERS (99) and 1/2” NYLON NUTS

(103).

IMPORTANT:

Loading the WEIGHT PLATES (46) will require two people. One to hold the GUIDE RODS (43)

steady while the other person slides the WEIGHT PLATES down the GUIDE RODS.

Step 19.

Step 20.

Step 21.

Step 22.

Step 23.

Step 24.

Attach PEC DEC TOP FRAME (10) to PEC DEC UP-

RIGHT (5) with 1/2” x 4-1/4” HEX HEAD BOLTS (84),

1/2” WASHERS (99) and 1/2” NYLON NUTS (103).

Attach PRESS TOP FRAME (6) to WEIGHT TOP

FRAME (9) with 1/2” x 3-1/2” HEX HEAD BOLTS (85),

1/2” WASHERS (99), LINK PLATE (32), BRACING

PLATE (106) and 1/2” NYLON NUTS (103).

Attach PRESS TOP FRAME (6) to PRESS UPRIGHT (4)

with 1/2” x 4-1/4” HEX HEAD BOLTS (84), 1/2” WASH-

ERS (99) and 1/2” NYLON NUTS (103).

Peal backing from WEIGHT LABEL No. “2” and apply

to first WEIGHT (46), in each stack, 1/2” to left of hole

as shown.

Peal backing from WEIGHT LABEL No. “1” and apply to

TOP PLATE (47), in each stack, directly above WEIGHT

LABEL No. “2” as shown.

Continue appling WEIGHT LABELS No. “3” through “19”

to WEIGHT PLATES (46), in both stacks, 1/2” to left of

hole as shown.

WEIGHT

LABEL

1/2”

Содержание 79130





































Результаты поиска

Содержание 79130

Отзывы:

Похожие инструкции для 79130

Бренды по названию

Популярные бренды

Universal 79130, Руководство пользователя

Результаты поиска

Содержание 79130

Отзывы:

Похожие инструкции для 79130

Бренды по названию

Популярные бренды