ON/OFF
Press this key to turn on the scale, or press and hold this key
to turn off the scale
ZERO
Press this key to manually set the display value to zero,
please refer to specification for manual zero range
TARE
Press this key to tare the weight off from the platter
MODE
1. Press this key to switch weighing unit from metric to
imperial(when this unit is enabled) and to piece
counting
2. P
ress and hold this key to engage sampling function
M+/MC
1. Press this key to save the weighing result to memory
2. Press this key to clear data saved in memory when MR
indicator is on
MR
1. Press this key to recall total accumulated weighing result
from memory
2. Press this key in piece counting mode for sampling
4 INTERNAL SETTINGS
Below table defines all the internal function, and kindly note some functions are
for dealer only. DO NOT try to open the scale or break with the hardware seal
when the unit is metrological approved.
DISPLAY
FUNCTION SETTING
ACCESS CONDITION
F0
Zero tracking speed
Dealer only when LOCKED
F1
1. Analog to digital offset value
2. Function key test
Open
F2
1. LCD segment check and software
version information2. Adjusting
backlight brightness
Open