background image

GB

BC4187011(1)

GB

Please read this Instruction Manual carefully and keep

it handy for future reference.

BODY COMPOSITION ANALYZER

BC-418MA

INSTRUCTION MANUAL

14-2,1-chome,Maeno-cho,Itabashi-ku 
Tokyo,Japan  
Tel:(03)3968-2123 / (03)3968-7048  Fax:(03)3967-3766

Dresdener Strasse 25  
D-71065 Sindelfingen, 
Germany  
Tel : 07031-6189-6
Fax : 07031-6189-71

Unit 301-303 3/F Wing On Plaza,
62 Mody Road, Tsimshatsui East, 
Kowloon, Hong Kong  
Tel  : +852-2838-7111  
Fax : +852-2838-8667 

2625 South Clearbrook Drive
Arlington Heights, Illinois 60005 U.S.A.
Toll Free : (800) 826-4828
Tel  : 847-640-9241  
Fax : 847-640-9261
http : //www.tanita.com

<Corporation Responsible in the EU Region>

The Barn, Philpots Close, Yiewsley,
West Drayton, Middlesex, 
UB7 7RY, United Kingdom  
Tel : +44-1895-438577  Fax : +44-1895-438511

Villa Labrouste 
68 Boulevard Bourdon, 
92200 Neuilly-Sur-Seine,
France
Tel : 01 55 24 99 99  
Fax : 01 55 24 98 68

This equipment conforms to the following Safety Standards, the EMC Directive and the required items in the Medical Device Directive.

Safety Standard

: EN60601-1:1990, AM No.1:1993, AM No.2:1995

IEC60601-1:1988, AM No.1:1991, AM No.2:1995

EMC Standard

: EN-60601-1-2:1993

IEC60601-1-2:1993

Medical Device Directory Standard :93/42/EEC:1993

Summary of Contents for Body Composition Analyzer BC-418MA






















Reviews: