Universal Flow Monitors FlowStream FP Series, Руководство пользователя

Страница: 10 / 21

FPMAN-1-190214 Page 10
CHG: Pressing CHG once shows the user menu. Once the desired menu item is selected, you
can do one of the following:

To change the set points

Press SET to choose the particular menu item.

Consecutive pressing of SET will cycle through the different digits of the set point.

Press UP or DOWN to increase or decrease the particular digit. Pressing SET will set
the digit.
 Long press SET until “SAVED” is displayed on the upper row of the LCD.

Press CHG to exit out of current menu item and change the next item.

To change Gas Setting

Consecutive pressing of SET will cycle through the different Gas options.

Once the desired gas is selected, keep holding the SET button down until “SAVED”
is displayed on the upper row of the LCD.

To exit out of the menu
Navigate to “EXIT” menu item with consecutive CHG presses. Press SET to exit out. An
alternative option is to not touch any buttons for 5 seconds, as the program will exit the
user menu after 5 seconds of inactivity.
Note: this option does not save the recent
settings.
USER MENU
FLOW HI : High set point for flow alarm. (This example shows the detailed steps for changing
a set point. All other menu items use the same method.)
Press the SET button to change. Range is 0-100% FS. If set to 0, alarm is disabled. Alarm
hysteresis is 1% FS.
When first digit starts blinking, use the UP and
DOWN buttons to adjust the digit, then press SET to
move to the next digit.
Blinking