Universal Electronics FOXTEL iQ, Руководство для продвинутых пользователей

Страница: 8 / 44

8
Using the av button
with a loop-through
device
You may wish to connect more items of equipment to your television than
your television has connectors to support (for example, the FOXTEL iQ, plus
a VCR, DVD player and/or games console). In this circumstance the FOX-
TEL iQ can act as an AV switcher allowing the television connector used by
the FOXTEL iQ to be shared with another item of equipment. This item is
referred to as the ‘loop-through device’ as it is connected to the VCR
SCART connector at the back of the FOXTEL iQ rather than directly to the
television (see diagram on previous page). Usually this device is the VCR.
If you have a ‘loop-through device’ you use the av button on the FOXTEL iQ
Remote to switch between the FOXTEL service and the loop-through
device.
1. To switch to the looped-through device, press the av button on the
FOXTEL iQ Remote.
Once you have pressed the av button, all the buttons on the FOXTEL iQ
Remote are disabled (unless it has been programmed as shown in this
Guide, in which case it will control your television's functions or other
device’s), except FOXTEL and the FOXTEL Digital Guide buttons (
tv
guide, box office, active and planner )
2. To return to FOXTEL, press FOXTEL (or any of the FOXTEL Digital
Guide buttons)
- If you want to use the ‘loop-through’ facility, your television must be
connected to the TV SCART connector on the FOXTEL iQ while the
loop-through unit (e.g. VCR) must be connected to the VCR SCART
connector on the FOXTEL iQ and the Video Output for the iQ must be
set to PAL
- If your setup does not include a looped-through device, then when you
press the
av button on the FOXTEL iQ Remote, your television will
display a blank screen when the av button is pressed. To return to
FOXTEL press the
FOXTEL button
- The AV switching function of the FOXTEL iQ switches audio and
composite video only.
FOXTEL_PVR_opmaak 15-02-2006 09:50 Pagina 8