11
Setting the Code
for your Device
Setting the Code For Your Television
1.
Switch your television on (not on standby).
2.
Find your device Code in the Television Code Reference
section (page 20 - 39). Codes are listed by brand name,
with the most common Code is listed first.”
3.
Press and release the
av
button on the FOXTEL iQ
Remote.
4.
Press and hold the
select
button, then press and hold
the red button. Keep both buttons held down until the LED
on the FOXTEL iQ Remote flashes twice
5.
Now enter your 4-digit Code, using the
number
buttons.
The LED will flash twice to indicate that the Code has
been accepted
6.
Point the FOXTEL iQ Remote towards your television and
press the
Power
button. If your television switches off,
the FOXTEL iQ Remote is successfully setup to control
your television set.
-
Some television’s do not switch on pressing the
Power
button, please
try pressing a “
number
” button to switch your television on.
-
If your device does not respond, follow steps 1 through 6 for each Code
listed for your device brand. If none of the Codes listed for your brand
operate your device, then try the Search Method described on the next
page, even if your brand is not listed at all.
-
Some Codes are quite similar. If your device does not respond or is not
functioning properly with one of the Codes, try another Code listed
under your brand.
Setting the Code for your AMP / TUNER
Follow steps 1 – 6, changing Step 4 to:
Press and hold the
select
button, then press and hold the
0
button. Keep
both buttons held down until the LED on the FOXTEL iQ Remote flashes
twice.
Setting the Code for your DVD / VCR
Follow steps 1 – 6, changing Step 4 to:
Press and hold the
select
button, then press and hold the
6
button. Keep
both buttons held down until the LED on the FOXTEL iQ Remote flashes
twice
av
select
_ _ _ _
FOXTEL_PVR_opmaak 15-02-2006 09:50 Pagina 11
Содержание FOXTEL iQ
Страница 1: ...Advanced User Guide FOXTEL iQ Remote ...
