Univers by FTE U5500, Руководство пользователя

Страница: 5 / 33

PAG . 5
rev 1.0
English
STEP 2: BASIC CONFIGURATION OF THE
RECEIVER
The receiver includes an installation assistant that will help you
to setup the different parameters.
When the receiver is turned on at fi rst time (using the button
at the rear panel of the receiver), the next menu is shown on
the TV:
In order to move through the different options of this menu,
please use the keysof the remote control. If an “Overloading!
Tuner Power is Off” message is shown on the TV, please
disconnect the “Antenna Input” cable and change the “Tuner
Power” option into “Off”
Region: select your country using keys.
Language: select the language of the menu and other
information of the receiver. To choose between the different
languages, use keys of the remote control.
Display Mode is use for switching the screen-displaying mode.
Now we provide below options: Auto / PAL / NTSC. You
can press [
] key to select each mode circularly.
Aspect Mode is used for switching the screen aspect ratio
mode. Now we provide below options: 4:3 PS / 4:3 LB /
16:9 / AUTO. You can press [
] key to select each mode
circularly.
Auto Scan: before making an auto scan (press [OK] button)
be sure that the data of the Region option (Image 1) is
correct, in other case the search of channels will be made
wrongly. Once the Region option is confi rmed, please press
[OK]. ( image 2)
Don’t make any action with the receiver until the Auto scan
has fi nished. For more information about this option, please
read point 4.1 of the complete manual.
IMAGE 1
IMAGE 2
QUICK INSTALLATION GUIDE