Univers by FTE U5500, Руководство пользователя

Страница: 25 / 33

PAG . 25
rev 1.0
English
6.4 SOFTWARE UPGRADE BY USB
This option allows updating the software of the receiver with
the received data from a USB 2.0 memory device. To do it,
connect a USB 2.0 memory device to the receiver and
acces to this menu option (OSD 43).
The last software version to be loaded must be placed at the
root path of your USB device.
1. Upgrade mode: Select with [
], the mode of
upgrading.
2. Update fi le: Select with [ ], the name of the fi le to
be loaded.
3. Select “Start” and press [OK]. An alert message appears
indicating not to take out the memory device during the
loadiing process.
4. Once the fi le has been loaded, it requires the conformity
to end the upgrading process, writing into the receiver the
upgrading. Press [OK] to upgrade the receiver. In
case during the reading of the fi le, it is corrupted or it would
be a not appropriated for this model of receiver, an alert
messagewould appear “Error reading the USB disk”.
5. After pressing [OK] the receiver will write into the Flash
memory, and it will reboot to end the upgrading process.
For further information about the upgrading of the receivers,
please visit http://www.universbyfte.com, in the chapter
about upgrading receivers.
6.5 SAFELY REMOVE STORAGE DEVICE
In “Media+” menu, select “Safely Remove Storage Device”,
press “OK”, to disconnect USB device of receiver (OSD 44).
TOOLS
OSD 42
OSD 43
OSD 44