5
Version 1.0
© UNIVERS
English
For your Safety
1
Before you start operating the receiver, make sure that the
satellite antenna is properly built up, optimally connected and
aligned.
The correct place to install the receiver is, of course, near your
TV set and any other A/V signal sources (DVD, VCR, CD,
game console, etc.).
Choose a stable support, in which you can easily lay the
necessary connecting cables without stumbling-danger.
The receiver should be installed near an easily accessible
outlet.
Do not install the receiver in a place where it can be reached by
liquid spills.
Do not put any heavy objects as, for example, a TV-device over
the receiver; the receiver could be damaged.
Do not install the receiver:
- On an unstable surface
- Subject to direct sunlight
- In high humidity environment
- Outside the receiver’s temperature range (+5°...+40°C)
If the receiver is subject to severe temperature changes, it can
suffer from water condensation inside. Switch off the receiver in
these cases for at least 2 hours before resuming operation.
