36
Version 1.0
© UNIVERS
English
Menus and OSD
6
Search
The option
Search
follows the same process as described in the chapter on
Installation
Menu>Antenna Config>Search
.
The search will be carried out in the selected satellite.
Add
This function allows you to add an entry to the
transponder list if you know the values.
In order to add some information to the TP List,
choose the
Add
option with the
VOL
press
buttons and press
OK
.
Enter now all the necessary information with the remote
control.
In the lower half of the window are displayed the currently LNB- / antenna values.
If you want to confirm, press
OK
and data will be stored.
If you want to cancel, press
EXIT
.
The new entry is added at the end of the list.
For a new program search in the new transponder entry, use the
Search
option.
For further information, please refer to Univers site in the web:
http://universbyfte.com
TP
With the
TP
(transponder search) option, programs can be easily searched in the
transponder if the transmission frequency is known. Choose, with the
VOL
buttons,
the
TP
entry.
With the
CH
buttons you can go to the page corresponding to the correct
frequency; confirm with
OK
afterwards.
Next message asks you whether the receiver is
supposed to delete all existing programs from the
chosen transponder or whether it is supposed to add
only the newly found programs.
Make your selection with
VOL
and press
OK
. If you want to cancel, press
EXIT
.
Add Transponder
Sat Name
ASTRA
Frequency
11837
MHz
Symbol
27500
Polarization HORIZ
FEC will be detected automatically
Satellite Infomation
Universal
On
LNC(Low)
09750 MHz
LNC(High)
10600 MHz
DiSEqC
DiSEqC A
Delete the existing programs
before searching?
Yes
No
!
