15
Version 1.0
© UNIVERS
English
Installation
4
Installation wizard:
Set up DiSEqC
If you receive more than one satellite through a DISEqC switch, you will need to assign
every satellite to the corresponding DISEqC output.
A typical setup for Spain is:
DiSEqC A = HOTBIRD
DiSEqC B = ASTRA
With the
CH
and
VOL
press buttons you can change between the
individual satellite and the LNC settings.
To change a selection, press the
OK
button. If you only need one satellite, change the
others to
Deactivated
in the DISEqC column.
Choose
NEXT
and press
OK
to go to the next menu.
If you have a DiSEqC-polarmount, select DiSEqC 1.2 in the column
type.
Load in the next step the pre programmed channel list.
To make the motor adjustments look to the
Motorised System
menu.
BACK
!
