V200-18-E2B
S n a p - i n I / O M o d u l e
10/06
10
Unitronics
Analog Outputs
Number of outputs
2 (single-ended)
Output range
0-10V, 0-20mA, 4-20mA. See Note 5.
Resolution (except at 4-20mA)
Resolution at 4-20mA
12-bit (4096 units)
819 to 4095 (3277 units)
Conversion time
Synchronized to scan time.
Load impedance
1k
Ω
minimum—voltage
500
Ω
maximum—current
Galvanic isolation
None
Linearity error
±0.1%
Operational error limits
±0.2%
Notes:
5.
Note that the range of each I/O is defined both by wiring and within the controller’s software.
Environmental
IP20 / NEMA1
Operating temperature
0
°
to 50
°
C (32
°
to 122
°
F)
Storage temperature
-20
°
to 60
°
C (-4
°
to 140
°
F)
Relative Humidity (RH)
5% to 95% (non-condensing)
Dimensions
Size (WxHxD)
138x23x123mm (5.43x0.9x4.84”)
Weight
231g (8.13 oz)
About Unitronics
Unitronics has been producing PLCs, automation software and accessory devices since 1989.
Unitronics’ OPLC controllers combine full-function PLCs and HMI operating panels into single, compact units.
These HMI + PLC devices are programmed in a single, user-friendly environment. Our clients save I/O points,
wiring, space, and programming time; elements that translate directly into cost-efficiency.
Unitronics supports a global network of distributors and sales representatives, as well as a U.S. subsidiary.
For more information regarding Unitronics products, contact your distributor or Unitronics headquarters via
email:
.
The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and
without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of
the forgoing from the market.
All information in this document is provided "as is" without warranty of any kind, either expressed or implied, including but not limited to any implied warranties of
merchantability, fitness for a particular purpose, or non-infringement. Unitronics assumes no responsibility for errors or omissions in the information presented in
this document. In no event shall Unitronics be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever arising out of or
in connection with the use or performance of this information.
The tradenames, trademarks, logos and service marks presented in this document, including their design, are the property of Unitronics (1989) (R"G) Ltd. or other third
parties and you are not permitted to use them without the prior written consent of Unitronics or such third party as may own them
5410-1042-7
