Unitronics V200-18-E2B, Быстрый старт

Страница: 9 / 10

10/06 V200-18-E2B
S n a p - i n I / O M o d u l e
Unitronics 9
Transistor Outputs
Number of outputs 4. Each can be individually wired as pnp (source) or npn (sink).
Output type pnp: P-MOSFET (open drain)
npn: open collector
Galvanic isolation Yes
Output current pnp: 0.5A maximum (per output)
Total current: 2A maximum (per group)
npn: 50mA maximum (per output)
Total current: 150mA maximum (per group)
Maximum frequency 20Hz (resistive load)
0.5Hz (inductive load)
High speed output maximum
frequency (resistive load). pnp: 2kHz
npn: 50kHz
ON voltage drop pnp: 0.5VDC maximum
npn: 0.85VDC maximum
See Note 4
Short circuit protection Yes (pnp only)
Power supply
operating voltage 20.4 to 28.8VDC
nominal operating voltage 24VDC
npn (sink) power supply
operating voltage 3.5V to 28.8VDC,
unrelated to the voltage of either the I/O module or the controller
Notes:
4. Outputs #12 and Output #13 may be used as high-speed outputs
Analog Inputs
Number of inputs 2 (single-ended)
Input range 0-10V, 0-20mA , 4-20mA. See Note 5.
Conversion method Successive approximation
Resolution (except at 4-20mA) 10-bit (1024 units)
Resolution at 4-20mA 204 to 1023 (820 units)
Conversion time Synchronized to scan time
Input impedance >100K Ω —voltage
500 Ω —current
Galvanic isolation None
Absolute maximum rating ±15V—voltage
±30mA—current
Full-scale error ±2 LSB (0.2%)
Linearity error ±2 LSB (0.2%)